The folder gluer is a common packaging equipment used to fold flat cardboard into boxes of various shapes and glue the bottom. In this article, we will introduce the adjustment steps of the folder gluer in detail

1. Preparation: Before starting to adjust the machine, you must first do the preparation work. Make sure that the folder gluer is in a stopped state and check whether the various parts of the equipment are intact. At the same time, prepare the required glue, cardboard and other auxiliary tools.

2. Adjust the feeding device: Put the cardboard into the feeding device of the folder gluer, adjust the tension and position of the feeding device, and ensure that the cardboard can enter the next process smoothly.

3. Adjust the folding part: According to the design requirements of the box, adjust the folding part of the folder gluer, including components such as the folding knife and folding wheel. Ensure that the folding position is accurate and the folding angle is appropriate.

4. Adjust the glue spraying system: Adjust the position and spraying amount of the glue spraying system as needed to ensure that the glue is evenly sprayed on the cardboard and does not cause waste or pollution.

5. Adjust the pressing device: Adjust the pressing device of the box gluer to ensure that the glue sealing part of the box can be evenly stressed and the glue is fully bonded.

6. Test run: Before formal production, it is very important to perform a test run. After adjusting various parameters, run the box gluer to make some samples, check the size, quality and glue bonding of the box, and ensure production quality.

7. Adjust details: According to the results of the test run, further adjust the details of the box gluer, such as adjusting the feeding speed, glue spraying position, etc., to achieve the best production effect.

8. Formal production: After the adjustment and testing of the above steps, the box gluer can be formally produced. During the production process, regularly check the equipment operation status and adjust various parameters in time to ensure production efficiency and product quality.